Getting Started With Your Broadband
Installing your router
Connect the first point of a phone cable (grey color) to a free phone plug and the other cable point to the splitter at the “LINE” socket.
At splitter’s “PHONE” socket:
- If you have a simple phone line (PSTN), connect your phone device using the device phone cable.
- If you have an ISDN phone line, connect the U port (at the lower device side) of the ISDN Network Terminal using the device phone cable. Next, connect you phone devices to the ISDN Network Terminal.
Connect the first point of the second phone cable (grey color) to router’s "DSL" port and the other end to the splitter at the "MODEM" socket.
Connect the first point of the Ethernet’s cable (yellow color) to the corresponding Ethernet port at your computer’s back side and the other cable point to any of the 4 router’s Ethernet ports (yellow color).
Connect the power cable to router’s "POWER" socket and to the power plug.
Press the On/off button at router’s back side.
Check router light indications after a few seconds.
- a) "Power" indication (power source) must be green and stable
- b) "Interne"” indication (access to the Internet) must be green
- c) One of the "LAN" indications (PC-router connection) must be green
- d) "WLAN" indication (active wireless network) must be green
- e) "DSL" indication (VDSL connection) must be green and stable
If the light indications are different, router settings may need changes.
Now you’re surfing the Internet!
STILL NEED HELP TO CONNECT?
Call our technical support team at 13700.
Connecting your wireless router
To connect to the wireless network, through the appropriate computer interface you have to find the available wireless networks, choose the desirable network (WLAN SSID) and type the unique 10-digit password key (WLAN Security), which can be found on the sticker at the router back side.
1. Open the browser of your choice (Internet Explorer, Mozilla Firefox, Google Chrome, etc.) and type the address 192.168.1.254 in the address bar to connect to your router management environment.
2. At the start page, type "admin" in the Username and Passwords fields and next press Login.
3. Navigate the top menu, choose “Internet” and in the left menu choose "WAN".
4. Choose "Network", "WAN" and "VDSL WAN Connection"
- In the New Connection Name menu choose "vdsl_internet"
- Choose “Enable VLAN”
- In the PPP field, type the connection data you have received (username must be followed by @tellas.gr)
- Press "Apply" and wait for a few second to connect
5. Make sure network settings for IP addresses and DNS server acceptance are automated, if you use Windows, or "Automatic" & "Using" options are checked, if you use MAC.
6. In case you encounter DSL synchronization problems when phone calls are being performed, get sure you have connected properly the splitter and you have connected to the filters every device (phone, fax) which is connected to the phone plug, different from the plug which the router is connected to.
7. In case of disconnections, make sure that you have connected properly the splitter and that not more than one router are connected..
8. In case you encounter wireless network disconnections, place the router into room as open-wide as possible, without any other devices or metallic objects nearby.
Setting your wireless network
1. Open up the browser of your choice (Internet Explorer, Mozilla Firefox, Google Chrome, etc.) and type the address 192.168.1.254 in the address bar to connect to your router management environment.
2. The first time you log in , type "admin" in the Username and Password fields and next press Login.
Once you access the router page, replace the default username and password with those of your choice. Choose successively, Administration -> User Management, fill in the Username, Old Password, New Password, Confirmed Password fields and then press "Submit" to save the change.
3. Navigate the top menu and select Network -> WLAN -> Basic (11n)
4. The wireless network settings page appears. Complete the fields according to the settings you want and then press "Submit".
To activate the wireless network:
- In the Wireless RF Mode field keep the choice "On". If you want to deactivate your wireless network, choose "Off" or else press the WLAN button located in the router’s back side.
- In the Country/Region field choose "Greece"
- In the Channel field choose "Auto" to automatically select the wireless transmission channel.
To name the wireless network, select the Network tab and then WLAN -> SSID Setting:
- In the Enable SSID field keep the choice "Yes" so that the wireless network is active
- In the SSID Name field, type the name of your choice
To set the security level of the wireless network select the Network tab and then WLAN -> Security:
- In the Authentication Type field select the safety of the wireless network. For maximum safety, we suggest you choose WPA2-PSK-AES or WPA- / WPA2-PSK
- In the WPA Passphrase field type in Latin characters the password you wish to secure the wireless network.
Memorize the password you have typed, because you will be asked for it on each computer you connect.
5. Press Submit to confirm your changes..
ΤΗΕ FIRST TIME YOU LOG IN TO THE ROUTER'S PAGE, DON’T FORGET TO REPLACE THE DEFAULT USERNAME AND PASSWORD WITH THOSE OF YOUR CHOICE.
Checking your router synch rate
1. Make sure you have connected to your router, either with a cable or wirelessly.
2. Start any browser and type in 192.168.1.254 in the address field in order to access your router’s graphical user interface.
3. Type your Username and Password.
4. Click on the ‘Status’ tab and then select "Network Interface" and ‘DSL Link Information’. The following menu appears:
5. The synchronization (synch) rate in kbps appears in the ‘Rate (Up/down) field. The upload speed appears first, followed by the download rate.
Your router basic features
- VDSL 2/ADSL 2+ modem/router
- Wireless: IEEE 802.11 b/g/n up to 300Mbps
- IPv6 support
- 4 Ethernet 10/100 LAN ports
- USB 1.0 host
- WPA/WPA2-PSK, WiFi on/off, WPS
- Firewall & Parental Control
- NAT, QoS, UPNP AV/DLNA for media sharing, DDNS, FTP server
- Low energy consumption (CoC compliant)
- 2 years warranty