Getting Started With Your Broadband
ZXHN H168N v3
Installing your router
Connect the first point of a phone cable (grey color) to a free phone plug and the other cable point to the splitter at the "LINE" socket
At splitter’s “PHONE” socket:
- If you have a simple phone line (PSTN), connect your phone device using the device phone cable.
- If you have an ISDN phone line, connect the U port (at the lower device side) of the ISDN Network Terminal using the device phone cable. Next, connect you phone devices to the ISDN Network Terminal.
Connect the first point of the second phone cable (grey color) to router’s "DSL" port and the other end to the splitter at the "MODEM" socket.
Connect the first point of the Ethernet’s cable (yellow color) to the corresponding Ethernet port at your computer’s back side and the other cable point to any of the 4 router’s Ethernet ports (yellow color).
Connect the power cable to router’s “POWER” socket and to the power plug.
Press the On/off button at router’s back side
7. Check router light indications after a few seconds.
- a) "Power" indication (power source) must be green and stable
- b) "DSL" indication (VDSL connection) must be green and stable
- c) "Internet" indication (access to the Internet) must be green
- d) One of the "LAN" indications (PC-router connection) must be green
- e) "WLAN" indication (active wireless network) must be green
If the light indications are different, router settings may need changes.
Now you’re surfing the Internet!
STILL NEED HELP TO CONNECT?
Call our technical support team at 13700.
Connecting your wireless router
To connect to the wireless network, through the appropriate computer interface you have to find the available wireless networks, choose the desirable network (SSID) and type the unique 10-digit password key (Wifi key), which can be found on the sticker at the router back side.
1. Open the browser of your choice (Internet Explorer, Mozilla Firefox, Google Chrome, etc.) and type the address 192.168.1.254 in the address bar to connect to your router management environment.
2. At the start page, type "admin" in the Username and Passwords fields and next press Login.
3.Navigate the top menu, choose “Internet” and in the left menu choose "WAN".
- At the Connection Name field choose your connection. The name that has been defined is the "VDSL internet", unless you've already created a different connection.
- In the PPP field, type the connection data you have received (username must be followed by @tellas.gr).
- Press "Apply" and wait for a few second to connect.
4. Make sure network settings for IP addresses and DNS server acceptance are automated, if you use Windows, or "Automatic" & “Using” options are checked, if you use MAC.
5. In case you encounter DSL synchronization problems when phone calls are being performed, get sure you have connected properly the splitter and you have connected to the filters every device (phone, fax) which is connected to the phone plug, different from the plug which the router is connected to.
6. In case of disconnections, make sure that you have connected properly the splitter and that not more than one router are connected.
7.In case you encounter wireless network disconnections, place the router into room as open-wide as possible, without any other devices or metallic objects nearby.
Setting your wireless network
1. Open up the browser of your choice (Internet Explorer, Mozilla Firefox, Google Chrome, etc.) and type the address 192.168.1.254 in the address bar to connect to your router management environment
2. The first time you log in , type "admin" in the Username and Password fields and next press Login.
Once you access the router page, replace the default username and password with those of your choice. Choose successively, Management & Diagnosis -> Account Management, fill in the Username, Old Password, New Password, Confirmed Password fields and then press “Apply” to save the change.
3. Choose Local Network in the menu appearing at the top of the page.
4. At the left menu choose WLAN.
5. Choose the first tab WLAN Basic, complete the fields according to the settings you want and then press "Apply".
To activate the wireless network, go to WLAN Global Configuration segment:
- In the Wireless RF Mode field keep the choice "On". If you want to deactivate your wireless network, choose "Off" or else press the WLAN button located in the router’s back side.
- In the Channel field choose “Auto” to automatically select the wireless transmission channel.
- In the Country/Region field choose "Greece".
When you have completed the changes, press “Apply”.
6. To name the wireless network go to the WLAN SSID Settings section:
- In the SSID Name field, type the name of your choice.
- In the SSID Hide field keep the choice "No" so that the wireless network name is visible.
7. To set the security level of the wireless network, under WLAN SSID Settings:
- In the Encryption Type field select the safety of the wireless network. For maximum safety, we suggest you choose WPA2-PSK-AES or WPA- / WPA2-PSK.
- In the WPA Passphrase field type in Latin characters the password you wish to secure the wireless network. Memorize the password you have typed, because you will be asked for it on each computer you connect.
8. Press "Apply" to save your choices.
ΤΗΕ FIRST TIME YOU LOG IN TO THE ROUTER'S PAGE, DON’T FORGET TO REPLACE THE DEFAULT USERNAME AND PASSWORD WITH THOSE OF YOUR CHOICE.
Checking your router synch rate
1. Make sure you have connected to your router, either with a cable or wirelessly
2. Start any browser and type in 192.168.1.254 in the address field in order to access your router’s graphical user interface
3. Type your Username and Password.
4. Click on the ‘Internet’ tab. The following menu appears:
5. The synchronization (synch) rate in kbps appears in the ‘Actual Rate (Up/Down)’ field. The upload speed appears first, followed by the download rate.
Your router basic features
- ADSL2+ for speeds up to 24Mbps
- VDSL 2(30a)/ADSL 2+ modem/router
- Wireless: IEEE 802.11 b/g/n (2X2) up to 300Mbps
- IPv6 support
- 4 Ethernet 10/100 LAN ports
- USB 2.0 host
- WPA/WPA2-PSK, WiFi on/off, WPS
- Firewall & Parental Control
- QoS, UPNP AV/DLNA for media sharing, DDNS, FTP server
- Low power consumption (CoC compliant)
- 2 years warranty